SPORTEC® shooting
For ideal protection in shooting halls
Specifically designed as a projectile-absorbing surfacing material, SPORTEC® shooting provides protection over floors, walls and ceilings of indoor shooting ranges and nearby outdoor facilities.
SPORTEC® shooting slabs installed on floors should be covered with an appropriate fireproof PU coating. It provides a seamless surface which can be easily cleaned of gunpowder deposits. On walls and ceilings this coating is not required.
|
|
Technical Data:
Material: |
Recycling tyre rubber granules bonded with polyurethane elastomer |
Thickness: |
40 mm |
Dimensions: |
500 x 500 mm / 1000 x 500 mm |
Colours: |
red (black and green available on request) |
Tolerances: |
Thickness ± 2.0 mm , Dimensions ± 0.8 % |
Fire resistance: |
Efl (B2) / Bfl-s1 (B1) (DIN EN 13501-1) |
Tensile strength: |
min. 0.2 N/mm² (EN ISO 1798) |
Elongation at break: |
min. 50 % (EN ISO 1798) |
Hardness: |
60 ± 5 Shore A (DIN 53505) |
Temperature range: |
-30° C to 80° C |
Wear resistance: |
rV 5.9 (DIN V 18035-6) |
Shooting protection: |
Tested and conformed the requirements, according Shooting Safety Institute Munich / Germany Test report No. : B-31/2009 |